CPS Custom Process Systems for Waste Water Treatment

CPS Custom Process System for mid and high volume waste water treatment

The CPS Waste Water Treatment Systems use CTECH's PolyClay technology to clarify spent solutions, emulsions and industrial effluent. The CPS waste water treatment system provides process design flexibility to meet specific waste removal needs. Standard systems can have a throughput capacity of up to 12m³ per hour, with treatment tank sizes ranging from 2 to 15m³ for optimum efficiency and economy. Process tanks are available in stainless steel, Polypropylene, Polyethylene and GRP.

Waste Water Equalisation Tanks  
These collect and homogenize the factory waste water. The Equalisation Tank volume is based on the system throughput capacity, with mixers installed to keep solids in suspension.

Waste Water Treatment Tanks  
Waste water Treatment Tanks are designed with a conical bottom and internal baffles. Decant connections are located on the straight side of the tank. Mixers are installed in the tanks, mounted on an integrated support bridge.

PolyClay Dosing Feeder
Various PolyClay feeder sizes are available ranging from 150 litres up to 1000 litres suitable for PolyClay bulk bags. The use of load cells improves dosing accuracy.

Mixers
Mixers used on all CPS systems have been selected to provide optimum process results during the addition of PolyClay into the waste water Treatment Tank and for solids suspension in the Equalization Tank.

Sludge Tanks
Sludge Tanks are used for holding sludge from the Treatment Tank to enable batches to be processed in the Treatment Tank independently of the Filter Press operation cycle.

Filter Press & Bandfilter
Either dewatering device or even a combination can be selected depending on the volume and type of sludge. CTECH manufacture a wide randge of filter press and bandfilter units

Control Panel
The CPS system can be operated in manual or manual/automatic mode. Control panels designed to meet specific site requirements can also be supplied.

Options
Since the CPS system is custom designed, options can be added to handle specific waste water treatment requirements.

CPS WASTE WATER TREATMENT SYSTEM KEY FACTS

The CPS Waste Water Treatment System is a custom designed system that is installed, piped, wired and tested on site. The key features are:

• System can be designed to handle virtually all batch sizes.
• All materials used for the equipment are chosen for their durability.
• Treated water and sludge can be  filtered or dewatered with Bandfilters and/or Filter Press units
• System produces 20 to 45% dry solids cake on average in combination with Bandfilters and up to 60% dry solids cake with Filter Press units.
• Automation options are available using  PLC's and touch screens for ease of operation.
• Process is easy to operate, no highly skilled operators required.

Typical Flow Chart of a CPS Waste Water Treatment System with PolyClay

Examples of models available:
 

Wastewater treatment from CTECH Europe, experts in:

Waste water treatment, effluent treatment, waste water treatment systems, effluent treatment systems, PolyClay, flocculation, water filtration, filter press units and sludge filtration.

We provide a FREE on-site assessment of your waste water treatment requirements .