Industrial Mixers and Agitators for Water Treatment

Top Entry Heavy Duty Industrial Fluid Mixers & Agitators

TERA Top Entry heavy duty industrial fluid mixers and agitators provide a cost effective solution for a wide range of mixing / agitating applications, motor power mixer shaft speed and impeller configuration are individually selected for optimum performance.

Heavy Duty MixersFeatures include:

  • Low headroom compact robust design
  • Standard metric motors
  • Power range from 0.25 to 15 k W
  • Hollow shaft gearbox ensures accurate mixer shaft alignment
  • Minimum service factor SF=1.50, for trouble free operation
  • Ground gears for efficiency and low noise
  • Open tank plate mounted and closed tank models available.





Mixer GeardriveMixer GreardriveTERA Mixer drives are designed on a very rigid structure enabling high bending loads, the mixer output shaft is supported by taper roller bearings or deep groove ball bearings on the smaller sizes drives. Gears are case hardened and ground for efficiency, low noise and maximum service life.



Mixer Shaft DesignMixer shaft design
The mixer shaft is designed to operate below first critical speed and at all frequencies up to 50 hz if an inverter is used with the drive.

Impellers
Impellers are selected by our application engineers to meet your process requirements

 

Mixer selection
TERA - Top entry heavy duty industrial fluid mixers and agitators are sized and selected to meet customer process requirements, a range of standard motor powers, mixer output speeds and impeller configurations are available to ensures optimum performance.

Model range
Ten mixer drives are available covering a power range from 0.25kw to 15 kw. Suitable for tanks and vessels from 25 to 60,000 litres.

Dimension diagrams

 Typical dimensions for low headroom - Plate mounted model

 

Model Mounting
A
B C D E F APPROX. MASS
LESS MOTOR
28- TERA 200 170 6 210 100 115 12KG
40- TERA 250 220 6 225 125 150 12.5KG
50- TERA 250 220 6 280 125 170 14KG
63- TERA 300 270 8 295 150 210 16KG
70- TERA 300 270 8 300 150 210 18KG
85- TERA 300 270 8 370 150 210 29KG
110- TERA 350 310 10 400 175 285 38KG
130- TERA 400 360 10 465 200 285 48KG
150- TERA 450 410 10 540 225 310 77KG
180- TERA 500 460 12 585 250 350 130KG
All dimensions in millimetres

EM - Parallel shaft double or triple reduction geardrives

 

EM - Top entry industrial fluid mixers and agitator with Double or Triple reduction parallel shaft helical gear drives, output speeds from 2 rpm - 1000 rpm , gears are case hardened and ground for efficiency and quietness under load.

Industries
General chemical, Food and beverages, Breweries, Industrial effluent treatment,

Mixer selection
 

Dimension Diagrams

EM- series typical dimensions.

 

Mixer size A B C D E F G H
EM-1 370 160 420 140 350 310 120 18
EM-2 380 160 490 150 350 310 130 18
EM-3 460 160 590 190 350 310 170 18
EM-4 560 190 670 190 400 360 180 22

TERA & EM mixer installations

TERA and EM mixer installations
 

Waste water treatment from CTECH Europe, experts in:

Waste water treatment, effluent treatment, waste water treatment systems, effluent treatment systems, PolyClay, flocculation, water filtration, filter press units and sludge filtration.

We provide a FREE on-site assessment of your waste water treatment requirements .